D.Dornblüth & Sohn Forum

You are not connected. Please login or register

Using a 50mm enlarging lens as a macro lens on Canon 450D

View previous topic View next topic Go down  Message [Page 1 of 1]

Couple of photos of Dornblüth 99.1 movement details using a Rodenstock 6 element 50mm enlarging lens with extension tubes on a Canon 450D.


Dornblüth 99.1 bridge engraving


Dornblüth 99.1 escapement showing swan neck regulator

dunk

View user profile

2 Beautiful! on Sun Feb 20, 2011 7:22 pm

Thanks Dunk, for those beautiful shots.

View user profile http://www.dornbluethblog.com
dornblogger wrote:Thanks Dunk, for those beautiful shots.

The movement is not easy to photograph and on another forum the integrity of the screw slots has been questioned because some look 'worn' in the pictures. However, the screw slots are perfect. This is my reply to the critics:

'Some screws look as if the slots have been compromised and I noticed the same anomaly myself when first saw the photos. However, when viewed through a loupe under a light the screw slots look fine. There are reflections 'at play' particularly the large screw which is partly hidden under the edge of the case back. The illumination used for the photo was far from ideal and was more Q&D than scientific hence light was spilling and reflecting in all directions. On the large screw there are reflections from the edge of the case back going down onto parts of the slot which result in the screw slot showing an apparent loss of integrity - but I can assure you it is caused by demon reflections and the actual screw slot is perfect.

I am planning to take some more photos of the same movement using different lighting ... maybe using coaxial lighting via a beam splitter which will be 90 degree lighting and penetrate all the screw slots. Please also bear in mind that the watch has a display back hence is being photographed through the glass of same - which also compromises the lighting. Coaxial lighting should make a much better job of the lighting.

Photos will be posted to show the effect and hopefully prove the screws' slots are perfect.'


I wish I had a DSLR camera with a video facility so that the action of the hairspring could be recorded - it is just like a heart beating. I may ask a colleague if he can video it for me.

dunk

View user profile

Sponsored content


View previous topic View next topic Back to top  Message [Page 1 of 1]

Permissions in this forum:
You cannot reply to topics in this forum